Commercial Audio - Cameo Lighting Features Explained

You may have been blown away by the brilliance of Cameo lighting products already, but if you need to clarify some of the features shown in the product descriptions, please find our Glossary below. If you would like further help, please do not hesitate to contact us.

In the meantime, you may like to download the Cameo Lighting Product Catalogue for more information.

	4 Shutter Framing Blades Like wing limiters, but significantly more flexible, there are four diaphragm sliders here that enable the light beam to be shaped. Each diaphragm slider can be individually angled and inserted all the way for complete shading. The diaphragm slider system can be rotated by 45° in both directions for exact positioning.
	ArtNet Compatible The device is ArtNet compatible. ArtNet is a network protocol for transmitting DMX-512 or RDM data via an ethernet connection.
	Calibration Chip The calibration chip ensures that the mixed colours of the lamp are reproduced identically when using serveral fixtures, thereby preventing any deviations in colour between the lamps.
	Circular Prism A circular prism multiplies the beam or the gobo projection, placing the result inside a circle.
	CMY This spotlight uses a white light source and subtractive CMY colour blending (cyan, magenta, yellow) for an extremely large palette of colours.
	COB LED Technology The current “chip-on-board” multi-LEDs allow dense, large-area light sources to be created that are characterised by their high luminosity and wide range of even colours. Cold white According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
	Cold White According to the colour temperature scale in Kelvin (K), “cold white” is a very bright, clear light in the colour temperature range between 5,000 and 10,000 K; it is slightly artificial in character and goes well with rich primary colours.
	Colour Wheel Turning the colour wheel, which is fitted with various filters, enables very fast changes of colour.
	Daylight Daylight colour temperature
	Dim-to-Warm The Dim-to-Warm function can be used to simulate the colour temperature drift of a traditional filament lamp.
	Discharge Lamp Discharge lamps are highly efficient and very bright. They provide a constant light output, good colour reproduction and a long service life.
	DMX512 Communication standard DMX512 was developed specially for lighting systems in 1986. Up to 32 DMX devices can be daisy-chained and controlled via a control source (e.g. a light mixer).
	ETL Certified This product is ETL certified.
	Flicker Free The high-frequency control of the LEDs while dimming ensures flicker-free operation, including for filming purposes.
	Focus The focus function serves to focus the light beam and the gobo projection at any distance.
	Gobo Wheel Gobo wheels are fitted with static or rotating gobos made of metal or glass. Gobos are essentially templates that allow the projection of patterns, shapes and graphics.
	Green The high energy efficiency, the long service life of the LED lamps and the low level of heat dissipation make this device particularly environment-friendly.
	iDMX App Control This fixture permits wireless control from any smartphone or tablet with Cameo’s iDMX® Controller App.
	Protection Class IP65 IP65 - This device is fully protected from the penetration of dust and water jets.
	Protection Class IP67 IP67 - This unit is fully protected against the ingress of dust and temporary immersion.
	Infrared Remote Control The device is fitted with an infrared sensor and can be controlled wirelessly using the IR remote control unit included.
	Iris The iris is a continuously variable opening for altering the diameter of the beam.
	LED Technology LEDs are ideal for use in lighting systems: They are bright and have a low level of heat dissipation, a long operating life and low energy consumption. Moreover, LED systems often weigh less than conventional lighting systems.
	Linear CTO This spotlight has a continuously variable CTO correction function (colour temperature orange) which enables settings from cold white to tungsten and warm white.
	Linear Prism A linear prism multiplies the beam or the gobo projection, placing the result inside a row.
	Master & Slave Master/slave operation allows identical DMX devices to be controlled by a DMX device of the same model and software standard. All the devices are connected by DMX cables in series. The master device is then set to run in standalone mode and the slave devices are set to run in slave mode.
	Multiple Angles Various dispersion angles possible
	Pan & Tilt The PAN & TILT feature moves light emission along the X and Y axes.
	Quad Colour Quad colour LEDs, or 4-in-1 LEDs, offer RGB colours with an additional amber-coloured emitter for richer colours and an additional white emitter for improved contrast and greater definition.
	RDM This device has full RDM capability. The RDM protocol supplements the DMX protocol and enables bidirectional communication via a standard DMX network. It simplifies configuration, administration and monitoring of RDM devices connected to an RDM controller.
	RGBA Additional amber LEDs allow warmer and richer colours to be created. Amber is outside the RGB spectrum.
	RGB + Amber & Lime RGBAL colour blending enables reproduction of virtually any colour and colour temperature of white.
	RGB + Lime The LED has a colour mix of Red, Green, Blue & Lime.
	RGB Plus White Additional white LEDs create more contrast and clearer colour boundaries. What is more, they improve the creation of white and pastel colours.
	RGB Plus White & Amber Additional white and amber-coloured LEDs expand the GB spectrum, creating more contrast as well as clearer colour boundaries. They also improve the creation of white and pastel colours. The amber-coloured LEDs create more powerful, warmer colours with greater saturation.
	sACN Compatible This spotlight is compatible with the sACN protocol (streaming ACN) for transporting DMX data via a network.
	Segment Pixel Control In comparison to single-pixel control, entire pixel segments (groups of pixels) can be controlled individually.
	Single Pixel Control The individual pixel control function enables colour and brightness of each LED pixel to be individually controlled (“Single Pixel Control”). This enables the device to generate animated graphic patterns and pixel mapping effects.
	SnapMag SnapMag™ technology allows objects to be simply and quickly magnetically fixed to a device.
	Standalone Mode In standalone mode, the device functions are controlled via integrated programmes, so no light mixer or “master” controller is required.
	Strobe Effect Strobes emit fast flash sequences, which makes movements appear “frozen” and creates a kind of slow-motion effect.
	Tunable White White tone adjustment from 1600K to 6500K
	UV UV and black light lamps are used to create decorative or artistic effects.
	Warm White According to the colour temperature scale in Kelvin (K), warm white is a soft, lightly yellowish light with a natural character that is pleasant to the human eye.
	Wireless DMX The W-DMX™ feature facilitates the wireless transmission of DMX control data.
	Wireless Master / Slave The device features wireless master/slave operation.
	Zoom This fixture features a motorized or manual zoom to vary its beam angle

Download Cameo_Product_Catalogue_2024_compressed.pdf Download

Your Order