Audio Technica PRO42
Audio Technica PRO42
Click to expand

Audio Technica PRO42

The Audio Technica PRO42 miniature cardioid condenser boundary microphone is one of our favourite products.

The inconspicuous low-profile design of the PRO42 is perfect for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 offers crisp, intelligible audio reproduction. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

 

List Ex VAT: £82.50
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Element

Fixed-charge back plate, permanently polarized condenser

Polar Pattern

Half-cardioid (cardioid in hemisphere above mounting surface)

Frequency Response

70-14,000 Hz

Open Circuit Sensitivity

-38 dB (12.5 mV) re 1V at 1 Pa

Impedance

100 ohms

Maximum Input Sound Level

134 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range

105 dB, 1 kHz at Max SPL

Signal to Noise Ratio

65 dB, 1 kHz at 1 Pa

Phantom Power Requirements

9-52V DC, 2 mA typical

Weight

1.2 oz (35 g)

Dimensions

1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height

Output Connector

3-pin XLRM-type on cable

Cable

25' (7.6 m) long, permanently attached

DOWNLOADS

EC Declaration of Conformity: PRO42
Audio Technica Pro42 Microphone datasheet